4.8 /
5
Based on more than 1400 Reviews
Green Stuff Tape 36,5 inches WITH GAP
€13.50
Tax included
Referencia: GSW9861
Kneadatite Blue/Yellow Green Stuff is a room-temperature curing two-part epoxy putty sold either in tape format.
Mixing equal parts of the yellow 'filler' and blue 'hardener' produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching 'ultimate hardness' after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.
We recommend to use a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process. You may also add talcum powder to reduce the stickiness and avoid fingerprints.
This set contains 92cm (36'5 inches) of material WITH GAP between both materials to extend its lifetime and avoid any waste of material.
-
INSURANCE
All items that we manufacture are covered by liability insurance
-
SECURE SHIPPING
Safe shipping through secure transport
-
SECURE PAYMENT
With Visa, MasterCard and PayPal
-
SATISFIED CUSTOMERS
More than 45,000 customers, see their opinions here.
Ratings and comments from our customers
Silicone Putty 200gr.
Green Stuff World Silicone Putty is platinum silicone that can be easily mixed and applied by hand. Mix it in equal amounts (1A:1B) by volume.
Green Stuff World Silicone Putty has a pot life of 2.5 minutes with a cure time of 10 minutes. Shrinkage is very low (0.03%) and when cured is exceptionally strong and durable (tear strength 6 N/mm). It will resist temperatures up to 150ºC.
Other applications include making fast mold impressions from almost any surface, orthotics, jewelry making and more.
The cure of the silicone putty may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern or a total lack of cure throughout the mold. Wear vinyl gloves only, since Latex gloves will inhibit the cure of the rubber. Also, tin-cure silicone, sulfur clays, certain wood surfaces, newly cast polyester resin, epoxy or urethane rubber may cause inhibition.
If compatibility between the silicone rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the cure time has passed.
(i) This set contains 200gr. of Green Stuff World Silicone Putty (100gr PartA + 100gr PartB)
GSW9861
2 Items
Specific References
New product
Customers who bought this product also bought:
4 other products in the same category:
Kneadatite Blue/Yellow Green Stuff is a room-temperature curing two-part epoxy putty sold either in tape format.
Mixing equal parts of the yellow 'filler' and blue 'hardener' produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching 'ultimate hardness' after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.
We recommend to use a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process. You may also add talcum powder to reduce the stickiness and avoid fingerprints.
This set contains 92cm (36'5 inches) of material WITH GAP between both materials to extend its lifetime and avoid any waste of material.
Green Stuff Tape 36,5 inches WITH GAP
€13.50
Tax included