- New
Key points:
Universal varnish with an extraordinarily beautiful gloss level
Environmentally friendly water-based varnish
Clean tools with water
hard, smooth, scratch-resistant surfaces
no yellowing
wash hands with lukewarm water
Tips:
For smooth, hard surfaces, coat 2 – 4 times; allow to dry well after each coat.
Depending on the surface, the adhesion can vary greatly, test first
Prime absorbent surfaces with diluted varnish and apply several coats
Drying time between coats approx. 1-2 hours
Note:
Allow to dry in a dust free place after varnishing
The final drying and development of adhesion takes place after at least 48 hours
Optimal processing and drying at 20 °C
For beautiful, smooth surfaces, it is better to apply several, thinner layers